Step 2 - Chassis Frame

Parts Required for Step 2

Name

Part #

Qty

Image

Completed Assembly from Part 1

2

432mm U-Channel

76010

2

 ../../../_images/432-u-channel.png

M3 x 10mm BHCS

76203

16

 ../../../_images/m3-10-bhcs.png

Instructions

  • Align the 192mm U-Channel with the 432mm U-Channel as shown in the picture on the right.

  • Using 4 M3 x 10mm BHCS, screw the 432mm U-Channel into the End Piece Plate on the 192mm U-Channel, as shown in the left picture. M3 BHCS requires the 2mm Hex Key (Pink).

  • Do not fully tighten the screws yet. They should be loose so the chassis can be straightened later.

  • Repeat the process for the other three End Piece Plates connected to the 432mm U-Channel.

  • Once everything is together, use the flattest surface to make all 4 channels as flat as possible.

  • With all the channels flat and square to your liking, all 16 M3 x 10mm BHCS can be fully tightened. Remember to use a star pattern when tightening to get even torque

Note

NEED TO ADD AN IMAGE HERE SHOWING THE HEX KEY GOING THROUGH THE CHANNEL

pic1 pic2