Step 7 - Securing the Motor Bracket

Parts Required for Step 7

Name

Part #

Qty

Image

Completed Assembly from Part 6

1

M3 x 10mm SHCS

76201

12

 ../../../_images/m3-10-shcs.png

Instructions

  • Using the M3 x 10mm SHCS screw in the 6 screws points as shown in the pictures below.

  • Once fully tightend, mesh the two bevel gears and tighten the setscrews. You may need to do one rotate the shaft and repeat to get all 4.

  • Repeat the process for the other side.

pic1 pic2