Step 1: Start Build
Name |
Part # |
Qty |
Image |
|---|---|---|---|
192mm U-Channel |
76015 |
2 |
|
End Piece Plate |
76015 |
4 |
|
M3 x 10mm SHCS |
76201 |
16 |
|
Instructions
Slide the End Piece Plate into the end of the 192mm U-Channel.
Using an M3 x 10mm SHCS screw from the outside of the 192mm U-Channel into the tapped holes of the End Piece Plate. The 2.5mm Hex Key (Green) is the tool to use here.
Repeat this process for the other side of the 192mm U-Channel.
The End Piece Plate should sit flush with both ends of the channel.
Once one channel is complete, repeat the process with the other 192mm U-Channel and two other End Piece Plates.
