Step 2 - Frame Assembly
Name |
Part # |
Qty |
Image |
---|---|---|---|
Completed Assembly from Part 1 |
2 |
||
240mm U-Channel |
76014 |
2 |
|
M3 x 10mm SHCS |
76201 |
16 |
Instructions
Align the 96mm U-Channel with the 240mm U-Channel as shown below.
Using M3 x 10mm SHCS, screw the 240mm U-Channel into the End Piece Blocks on the 96mm U-Channel. Do not fully tighten the screws
Once all 16 screws have been put in, square up the frame so that everything is straight and level.
Fully tighten all screws using a star pattern.
Note
NEED TO ADD AN IMAGE HERE SHOWING THE HEX KEY GOING THROUGH THE CHANNEL