Step 1 - Start Build
Name |
Part # |
Qty |
Image |
---|---|---|---|
96mm U-Channel |
76017 |
2 |
![]() |
End Piece Plate |
76015 |
4 |
![]() |
M3 x 10mm SHCS |
76201 |
16 |
![]() |
Instructions
Slide the End Piece Plate into the end of the 96mm U-Channel.
Using an M3 x 10mm SHCS screw from the outside of the 96mm U-Channel into the tapped holes of the End Piece Plates.
Repeat for the other side.
The End Piece Plate should sit flush on both ends of the channel.
Once one channel is complete, repeat the process with the other 96mm U-Channel and two other End Piece Plates.
