Step 13 - Servo Part 1

Parts Required for Step 13

Name

Part #

Qty

Image

M3 x 10mm SHCS

76201

2

 ../../../_images/m3-10-shcs.png

Servo Mount Offset Plate

76146

1

 ../../../_images/offset-plate.png

Multi-Mode Smart Servo

75002

1

 ../../../_images/multi-mode-smart-servo.png

Instructions

  • Screw the Servo into the offset plate using 4 M3 x 10mm SHCS.

  • The Servo spline should be in line with the 14mm hole from the offset plate.

  • Make sure the servo tab fits in the middle of the tab slot on the offset plate.

pic1 pic2