Step 3:

Parts Required for Step 3

Name

Part #

Qty

Image

NeveRest 51

am-4609b

1

 ../../../_images/neverest-51.png

Orbital Motor Mount

76138

1

 ../../../_images/orbital-motor-mount.png

13 Tooth Bevel Gear

76223

1

 ../../../_images/13-tooth-bevel.png

M3 x 12mm SHCS

76202

4

 ../../../_images/m3-12-shcs.png

Instructions

  • Slide the Orbital Motor Mount onto the NeveRest 51 Motor.

  • Using 4 x M3 SHCS, screw the motor mount into the motor.

  • Slide the 13 Tooth Bevel Gear onto the D-Shaft of the motor.

../../../_images/BasicBot3.png

  • Try to keep it loose by only tightening a little bit. Set screws are highlighted in red. Use the pink hex key(2mm) to tighten.

../../../_images/BasicBot4.png